Subject | Text |
Hitachi V-1150 Oscilloscope problem and cure. | I offer this in the hope it will save someone hours of frustration!
I was delighted to be given a H |
| Hallo friend for the dim pro you have to see 2 capasitor above the power supply 10mf/25v or 100/25v |
|
Trouble shooting systems | [quote:36d03f5807="Anonymous"]After 46 years servicing electronics, there is one thing that never fa |
can will help to shift a frequency | Who step of adjustment FM with 200 on 100 can will help to shift a frequency grid-switch. Device Chr |
PAL oscillator | Try to adjust the 4,43 Mhz trimmer from Pal osc. (near to 4,43 quartz) |
Panasonic EURO-4H TX-32PK25D H-OUT missing | Panasonic TX-32PK25D
Chassis: EURO-4H
HOT (Q551, 2SC5144LB228) was defect [before this, the TV h |
service manual for PINTEK PS-200 | Hi all - Can anyone help out with a service manual or schematics for PINTEK PS-200 Oscilloscope?
|
| [quote="Andrew99"]Yes! that's the one... but...
AWZ6405 POWER SUPPLY (NLA - SEE NOTE |
Wanted Service Manual Kenwood PD35-10 PSU (Analog meters) | Hello I am the owner of one Trio Kenwood PD35-10 Power supply, thankfully it does not have any damag |
LGA VGA monitor cable broken | if anyone knows color cable for LG STUDIOwork 700s monitor
please help me because my vga cable conn |
Equipment Repairs | I don't know what you are exactly asking...are you asking about which audio system would be good for |
| [quote:4f5644abc6="yohan"]same issue ,iiyama e2208hds, blue led flashing, delayed display on boot (1 |
| Hmm, I'll gues I mixed up the autocoupler and controller IC, my english isn't a 100 %, sorry :lol: |
Re: 50MP1 | Thanks Dooney for your help. Here are some pictures of the NEC 50MP1. I hope you can make sense of |
Viewsonic N1700w LCD TV tuner and VGA/DVI OSD problems | I have a Viewsonic N1700w HDTV LCD display that I've been having some problems with. The tuner mode |
Need Driver For IBM NetVista 8310-KHG | Hi. Maby somebody can help me find drivers for this pc?
My pc:
IBM NetVista 8310-KHG
Computer
|
How to change "KDC 215s" tuner in US-model to Euro | Hi,
Problem is that the tuner is US-model so it steps only 0.2 MHz steps I can't listen to freque |
|
| EXPLANATIONS:
X-SUS (or called also z-SUS)
and
Y-SUS are complex circuitry that are deliveri |
| Wow.
I just stumbled across this post and I have to say THANK YOU SO MUCH!
I was having the |
Sony Crt TV in need of minor convergence | Hi All,
New to the forum but experienced with analog audio repairs.
I have 10 -15 yr old s |
CD Player Skipping And Running Backwards! | Hello.
I have a Micromega Leader II CD player (Which is based on a Pioneer machine I think) which |
| If Radio / CD, etc. ALL work ... Your receiver is fine.
To confirm, take one of your working inputs |
| Answering my own question, I replaced C424=100 uf,35v along with C425=470 uf,35v C427=2200 uf,35v an |
Same TV, same problem | My Magnavox has the exact same problems. Unplugging it for the night and holding in the power button |
| change the 5.5 MHZ crysal in IF sound with one 6.0Mhz and if in output of sound IF ther is a coil ad |
| Remember that Argentina uses a special variant of the 625-line PAL system. The color subcarrier freq |
| - Check for mecha's assy wear, inclusive tape path guides
(not a good thing to play with the al |
Sony DCR-HC 40E videocamera | Hi, I have a problem with my Sony DCR-HC 40E videocamera recorder.
It has been working fine for t |
Onkyo TX-NR609 no sound | My Onkyo TX-NR609 was working without a problem when switched off. When I turned it on the next morn |
Toshiba TV 14R21 (PWB-1386 Board) keeps power on and off | I have a 14R21 Toshiba old TV and still not consider it as a junk. The problem now was after few min |